Navigate to Answers for:[ Questions #1#10  Questions #11#25  Questions #26#36  Questions #37#45 ] [ #26  #27  #28  #29  #30  #31  #32  #33  #34  #35  #36 ] 
26. Approximate the work required lift a 2.5kg object to a height of 6.0 meters. PSYW
Answer: 147 J The work done upon an object is found with the equation In this case, the d=6.0 m; the F=24.5 N (it takes 24.5 N of force to lift a 2.5kg object; that's the weight of the object), and the angle between F and d (Theta) is 0 degrees. Substituting these values into the above equation yields 

Definition and Mathematics of Work 
[ #26  #27  #28  #29  #30  #31  #32  #33  #34  #35  #36 ]
27. A student applies a force to a cart to pull it up an inclined plane during a physics lab. A force of 20.8 N is applied parallel to the incline to lift a 3.00kg loaded cart to a height of 0.450 m along an incline which is 0.636m long. Determine the work done upon the cart and the subsequent potential energy change of the cart. PSYW
Answer: 13.2 J There are two methods of solving this problem. The first method involves using the equation where F=20.8 N, d=0.636 m, and Theta=0 degrees. Substituting and solving yields The second method is to recognize that the work done in pulling the cart along the incline changes the potential energy of the cart. The work done equals the potential energy change. Thus, 

Definition and Mathematics of Work  Potential Energy 
[ #26  #27  #28  #29  #30  #31  #32  #33  #34  #35  #36 ]
28. Eddy, whose mass is 65.0kg, climbs up the 1.60meter high stairs in 1.20 s. Approximate Eddy's power rating. PSYW
Answer: P = 849 Watts Eddy's power is found by dividing the work which he does by the time in which he does it. The work done in elevating his 65kg mass up the stairs is determined using the equation where F = m*g = 637 N (the weight of the 65.0 kg object), d =1.60 m and Theta = 0 degrees (the angle between the upward force and the upward displacement). Solving for W yields 1019.2 Joules. Now divide the work by the time to determine the power: 

Definition and Mathematics of Work  Power 
[ #26  #27  #28  #29  #30  #31  #32  #33  #34  #35  #36 ]
29. A 51.7kg hiker ascends a 43.2meter high hill at a constant speed of 1.20 m/s. If it takes 384 s to climb the hill, then determine ... . PSYW
Answers:
a. The speed of the hiker is constant so there is no change in kinetic energy  0 J. b. The potential energy change can be found by subtracting the initial PE (0 J) from the final PE (m*g*h_{f}). The final potential energy is 21888 J [from (51.7 kg)*(9.8 m/s/s)*(43.2 m)] and the initial potential energy is 0 J. So Delta PE = +21888 J (rounded to 21900 J). c. The work done upon the hiker can be found using the workenergy theorem. The equation reduces to (PE_{i} = 0 J since the hiker starts on the ground; and KE_{i } = KE_{f} since the speed is constant; these two terms can be dropped from the equation since they are equal). The final potential energy is 21888 J [from (51.7 kg)*(9.8 m/s/s)*(43.2 m)]. So W = +21888 J (rounded to 21900 J). d. The power of the hiker can be found by dividing the work by the time. 

Potential Energy  Kinetic Energy  Definition and Mathematics of Work  Power 
[ #26  #27  #28  #29  #30  #31  #32  #33  #34  #35  #36 ]
30. An 878kg car skids to a stop across a horizontal surface over a distance of 45.2 m. The average force acting upon the car is 7160 N. Determine ... . PSYW
Answers:
a. The work done upon the car can be found using the equation where F=7160 N, d=45.2 m, and Theta=180 degrees (the force is in the opposite direction as the displacement). Substituting and solving yields 323632 J (rounded to 324000 J). b. The initial kinetic energy can be found using the workenergy theorem. The equation reduces to (PE_{i} and PE_{f} = 0 J since the car is on the ground; and KE_{f} = 0 J since the car is finally stopped). Rearrange the equation and it takes the form KE_{i} = W_{nc} . So KE_{i} = +323632 J (rounded to +324000 J). c. The acceleration of the car can be found using Newton's second law of motion: F_{net} = m*a The friction force is the net force (since the up and down forces balance) and the mass is 878 kg. Substituting and solving yields a = 8.16 m/s/s. d. The initial velocity of the car can be found using the KE equation: KE = 0.5*m*v^{2} where m=878 kg and KE_{i}=323632 J. Substituting and solving for velocity (v) yields v = 27.2 m/s. (A kinematic equation could be also used to find the initial velocity.) 

Calculating Work  Analysis of Situations Involving External Forces 
[ #26  #27  #28  #29  #30  #31  #32  #33  #34  #35  #36 ]
31. A 510kg roller coaster car starts at a height of 32.0 m. Assuming negligible energy losses to friction and air resistance, determine the PE, KE, and speed of the car at the various locations (A, B, C, D, and E) along the track.

(m) 
(J) 
(J) 
(m/s) 



































Answers: See above table (answers in red) The potential energy for every row can be found using the equation PE = m*g*h where m=510 kg and g = 9.8 m/s/s. In the first row, the total mechanical energy (KE + PE) equals 160 000 J (rounded). Since no work is done by nonconservative forces, the total mechanical energy must be 160 000 J in all the other rows. So the KE can be computed by subtracting the PE from 160 000 J. The velocity can be found using the equation: where m=510 kg. 

Potential Energy  Kinetic Energy  Analysis of Situations in Which Mechanical Energy is Conserved 
[ #26  #27  #28  #29  #30  #31  #32  #33  #34  #35  #36 ]
32. A 65.8kg skier accelerates down an icy hill from an original height of 521 meters. Use the workenergy theorem to determine the speed at the bottom of the hill if...
a. ... no energy is lost or gained due to friction, air resistance and other nonconservative forces. PSYW
b. ... 1.40*10^{5}
J of energy are lost due to external forces.
PSYW
Answers: (a) v = 101 m/s; (b) v = 77.2 m/s a. Use the work energy theorem: The PE_{f} can be dropped from the equation since the skier finishes on the ground at zero height. The KE_{i} can also be dropped since the skier starts from rest. The W_{nc} term is dropped since it is said that no work is done by nonconservative (external) forces. The equation simplifies to The expressions for KE (0.5*m*v^{2}) and PE (m*g*h) can be substituted into the equation: where m=65.8 kg, h=521 m, g=9.8 m/s/s. Substituting and solving for v_{f} yields 101 m/s. b. This equation can be solved in a similar manner, except that now the W_{ext} term is 140000J. So the equation becomes Now substituting and solving for v_{f} yields 77.2 m/s. 

Analysis of Situations in Which Mechanical Energy is Conserved  Analysis of Situations Involving External Forces 
[ #26  #27  #28  #29  #30  #31  #32  #33  #34  #35  #36 ]
33. Use the workenergy theorem to determine the force required to stop a 988kg car moving at a speed of 21.2 m/s if there is a distance of 45.7 m in which to stop it. PSYW
Answer: F = 4.86*10^{3} N The work energy theorem can be written as The PE_{i} and PE_{f} can be dropped from the equation since they are both 0 (the height of the car is 0 m). The KE_{f} can also be dropped for the same reason (the car is finally stopped). The equation simplifies to The expressions for KE (0.5*m*v^{2}) and W_{nc} (F*d*cos[Theta]) can be substituted into the equation: where m=988 kg, v_{i}=21.2 m/s, d=45.7 m, and Theta = 180 degrees. Substituting and solving for F yields 4.86*10^{3} N. 

Kinetic Energy  Analysis of Situations Involving External Forces 
[ #26  #27  #28  #29  #30  #31  #32  #33  #34  #35  #36 ]
34. Consider the following physical situations. Identify the forces which do work upon the indicated object (in boldface type) and categorize them as conservative or nonconservative forces. Then indicate whether the total mechanical energy of the object changes; it it changes, then indicate whether the change is a positive or negative change. Finally, indicate whether the potential energy and the kinetic energy changes; if PE or KE changes, then indicate whether the change is a positive or negative change.
Description of Physical Situation 
Which Do Work: 





Conserve. 
(+ or ) 

(+ or ) 

(+ or ) 


a. A force is applied to move a physics cart from the floor to the top of an inclined plane at a constant speed. 






b. A physics student scurries up a flight of stairs at constant speed. 






c. In a moment of unsupervised phun, a physics student hoists herself onto a staircase banister and accelerates down the banister. Ignore all friction forces. 






d. A ball is dropped from rest from on the top of a hill and falls to the ground below. Ignore air resistance. 






e. A ball leaves top of a hill with a large horizontal velocity. It falls to the ground below. Ignore air resistance. 






f. A Hot Wheels car is at rest at an elevated position along an inclined plane; it is released and rolls to a position along the ground. Ignore air resistance. 






g. A Hot Wheels car is in motion at the bottom of a hill when it hits a computer diskette box and skids to a stop. 






h. A pendulum bob swings from its highest position to its lowest position. 






i. A physics cart is released from rest at an elevated position along an inclined plane; it is released and rolls to a position along the incline approximately 5 cm from the bottom. 





Answer: See table above Note that whenever a nonconservative force is doing work (as in a, b, g), the total mechanical energy is changing. However, when the only forces which do work are conservative forces, the total mechanical energy will remaining constant (i.e., be conserved). In such cases, energy will change form from potential to kinetic energy (or vice versa); yet the total amount of the two forms would not be changed. Potential energy can be considered to change if an object changes its height; if the height decreases, then the potential energy decreases; it the height increases, then the potential energy increases. Kinetic energy can be considered to change if an object changes its speed; if the speed decreases, then the kinetic energy decreases; it the speed increases, then the kinetic energy increases. 

Analysis of Situations in Which Mechanical Energy is Conserved  Analysis of Situations Involving External Forces 
[ #26  #27  #28  #29  #30  #31  #32  #33  #34  #35  #36 ]
35. The diagrams below depict a physical situation. Analyze each situation and construct workenergy bar charts.
Description of Physical Situation 

a. A Hot Wheels car starts
from rest on top of an inclined plane and rolls down the incline
through a loop and along a horizontal surface. Ignore the effect of
friction and air resistance on the car. 

b. A Hot Wheels car starts from rest on top of an inclined plane and rolls down the incline through a loop and along a horizontal surface. Friction and air resistance have a significant effect on the car. 

c. A pendulum bob is mounted on top of a lab pole and drawn back to a string which it tied between two other poles. The pendulum bob is released from rest. Upon reaching the vertical, the string hits a barrier and a new pivot point is established as the bob continues in motion along an upward trajectory. Ignore the effect of air resistance. 

d. A track is constructed by
stretching a grooved and pliable material between two lab poles. A
metal ball starts from rest at point A and rolls along the groove to
point B. Friction and air resistance have an effect upon the ball's
motion. 

e. A dart is placed in a dart gun and the springs are compressed. The trigger is pulled and the dart is projected towards a wall. The dart collides with the wall and sticks to it. Ignore the effect of friction and air resistance. 

f. Ben Laborin applies a
force to push a crate from the bottom of an inclined plane to the top
at a constant speed. 

Answer: See above table; explanations given below. There are a couple of major principles behind these bar charts: First, the initial energy (KE_{i} + PE_{gi} + PE_{si}) plus the work done by nonconservative forces (W_{nc}) must equal the final energy (KE_{f} + PE_{gf} + PE_{sf}); thus the heights of the bars on the left side of the chart must equal the height of the bars on the left side of the chart. Second, the bars must appropriately depict the form of energy and the relative amount for both the initial and final state. The above charts are not the only means of appropriately representing the motion. Other renditions which adhere to these two basic principles would be considered correct. a. The car is initially at rest (no KE) and has some height above the floor (there is PE_{g}). The car is moving at the bottom of the track (there is KE) but it does not have any height (no PE_{g}). Since there is no friction nor air resistance, the W_{nc} term is zero. b. Part b is similar to part a with the exception that friction and air resistance are to be considered in part b. So the analysis involves a consideration of the W_{nc} term. The W_{nc} term is negative since friction and air resistance are forces which oppose the motion of an object. The result is that energy has been removed from the system and the final kinetic energy bar is less than the initial potential energy bar. c. If the tabletop (or floor) is considered the zero level, then the bob has gravitational potential energy in both its initial and final states. Yet the final PE_{g} is less than the initial PE_{g} since the final height (as shown) is less than the initial height. Since the air resistance is negligible, the W_{nc} term is zero. The difference in potential energy must be made up for in the form of kinetic energy. The bob would still be moving at the final position as shown. d. This analysis is identical to part a except that the car has been replaced by a ball. e. The dart is initially above the ground (the assumed zerolevel) and finishes above the ground but a little lower than the initial height; thus, there is some PE_{g} to begin with and a little less PE_{g} in the final state. The springs are initially compressed, so there is some initial PE_{s}. The wall does work upon the dart to stop it; this would be negative work since the force is exerted in a direction opposite the motion of the dart. Initially the dart is not moving; so there is no initial KE. And after hitting the wall, it is not moving as well. f. The worker is applying a force to displace the crate; this is a nonconservative force and so there will be a W_{nc} term. Since this applied force is in the direction of motion, the W_{nc} term will be positive. The crate is moving (it has KE) at a constant speed; since the speed is constant, the amount of KE is the same in the initial state as in the final state. Initially there is no gravitational potential energy (PE_{g}) since the crate starts on the ground; in the final state, there is some gravitational potential energy (PE_{g}) since the crate is at an elevated position. 

Bar Chart Illustrations 
[ #26  #27  #28  #29  #30  #31  #32  #33  #34  #35  #36 ]
36. Several physical situations are described below. For each situation, simplify the workenergy equation by canceling any zero terms and any energy terms (whether KE or PE) which are unchanging. Explain each term which gets canceled. The first problem is done as an example.
Description of Physical Situation 

a. A ball starts from rest on top of a tall pillar and falls to the ground below. Assume the effect of air resistance is negligible.


b. A ball starts from rest
at an elevated position along an inclined plane and rolls to the ground
below. Assume that the effect of friction and air resistance is
negligible. 
PE_{i} = KE_{f} (Initially the ball is at rest, KE_{i} = 0 and cancels. Since the final height is 0, PE_{f} = 0 and cancels. Since nonconservative forces are not doing work, W_{nc} 
c. A ball starts from rest at an elevated position along an inclined plane and rolls to the ground below. Consider the effect of friction and air resistance.

(Initially the ball is at rest, KE_{i} = 0 and cancels. Since the final height is 0, PE_{f} = 0 and cancels. Friction is a nonconservative forces and it does work so W_{nc} does not cancel.) 
d. A track is constructed by
stretching a grooved and pliable material between two lab poles. A
metal ball starts from rest at point A and rolls to point B. Friction
and air resistance have an effect upon the ball's motion. 
(The ball is at rest in both its initial and final states, so both KE_{i} = 0 and KE_{f} = 0 and cancels. Friction and air resistance are nonconservative forces and do work so W_{nc} does not cancel.) 
e. A pendulum bob is mounted on top of a lab pole and drawn back to a string which it tied between two other poles. The pendulum bob is released from rest. Upon reaching the vertical, the string hits a barrier and a new pivot point is established as the bob continues in motion along an upward trajectory. Ignore the effect of air resistance. 
PE_{i} = KE_{f} + PE_{f} (Initially the ball is at rest, KE_{i} = 0 and cancels. At the point shown in the diagram as the final state, the ball has both height and would still be moving; so neither final energy term would cancel. The only nonconservative force present  tension  does not do work since it is directed at 90degrees to the direction of motion; so W_{nc} cancels.) 
f. A Hot Wheels car starts
from rest on top of an inclined plane and rolls down the incline
through a loop and along a horizontal surface. Friction and air
resistance have a significant effect on the car. 
PE_{i} + W_{nc} = KE_{f} (Initially the car is at rest, KE_{i} = 0 and cancels. Since the final height is 0, PE_{f} = 0 and cancels. Friction is a nonconservative forces and it does work so W_{nc} does not cancel.) 
g. An unattended hot dog
wagon starts from rest and rolls down a hill and up a second hill.
Ignore the effect of friction and air resistance. 
(Initially the wagon is at rest, KE_{i} = 0 and cancels. The wagon has height in its initial state, so the PE_{i} term does not cancel. At the point shown in the diagram as the final state, the wagon has both height and would still be moving; so neither final energy term would cancel. There is no friction nor air resistance and the normal force does not do work since it is perpendicular to the displacement; so W_{nc} cancels.) 
h. A roller coaster car is already in motion on the top of the first drop and rolls along the track over a couple of hills. Ignore the effect of friction and air resistance. 
PE_{i} = KE_{f} + PE_{f} (Initially the car is at rest, KE_{i} = 0 and cancels. The car has height in its initial state, so the PE_{i} term does not cancel. At the point shown in the diagram as the final state, the car has both height and would still be moving; so neither final energy term would cancel. There is no friction nor air resistance and the normal force does not do work since it is perpendicular to the displacement; so W_{nc} cancels.) 
i. A crosscountry skier is in motion on top of a small hill. He skis down the hill into the valley and up a second smaller hill. He uses his poles to propel himself during the entire motion. Ignore the effect of friction and air resistance. 
(Initially, the skier has height and motion and so neither initial energy term will cancel. The skier is using his poles to propel himself so there is a nonconservative force doing work; the W_{nc} term does not cancel. In the final state, the skier is moving and has height (presuming that the zero level is the valley) and so neither final energy term will cancel. 

Analysis of Situations in Which Mechanical Energy is Conserved  Analysis of Situations Involving External Forces 
[ #26  #27  #28  #29  #30  #31  #32  #33  #34  #35  #36 ]
[ Questions #1#10  Questions #11#25  Questions #26#36  Questions #37#45 ] [ #26  #27  #28  #29  #30  #31  #32  #33  #34  #35  #36 ] 
GBS Physics Home Page  ChemPhys 173 Home Page  The Physics Classroom The Laboratory  Unit Schedules  The Review Session  The Quiz Room 